Spectar co-polyester is Eastman's premier product for signs and displays. Spectar extrudes into plastic sheet that is crystal clear, tough, chemically resistant, odor-free, versatile, easy to work with, and affordable. Spectar accepts screen printing, painting, and hot stamping.

Its toughness allows fabricators to use thinner-gauge sheet than with other common materials, resulting in lower material costs. Yet Spectar can be extruded into sheets as thick as 12mm. Additinally, Spectar extrudes at low temperatures and will not crystallize or develop a crystalline haze. Most cleaning solutions will not turn Spectar co-polyester white.

Spectar's ease of fabrication allows for versatility in design. Spectar can be laser cut, routed, welded, drilled, die-punched, bent hot or cold, or joined by screws, rivets, or bolts. It can also be cut on a conventional table, band, or radial arm saw with blades commonly used for plastic. Spectar can be vacuum formed at low temperatures without predrying the sheet and can be polished using commercial edge-finishing equipment, sanding, solvents, flame-polishing, or buffing. Surface scratches can be removed using a common heat gun.

Spectar co-polyester is a remarkably processible plastic that is perfect for signs and displays. Spectar. Spectacular.

PETG is available from KRS Plastics in sheet or roll form.

Prices are based on quantity and availability.